Search for Auctions or Products...

Call us: +55 11 3280-5567 / +1 210 209-9217
Send us an email: hello@surpplax.com.br
  1. Home
  2. GS E&C 10 Tons Overhead Crane (1 unit)

GS E&C 10 Tons Overhead Crane (1 unit)

172 views
No reserve
GS E&C 10 Tons Overhead Crane (1 unit)
GS E&C 10 Tons Overhead Crane (1 unit) - Image 2
GS E&C 10 Tons Overhead Crane (1 unit) - Image 3
GS E&C 10 Tons Overhead Crane (1 unit) - Image 4
GS E&C 10 Tons Overhead Crane (1 unit) - Image 5

GS E&C 10 Tons Overhead Crane (1 unit)

Available used surplus GS E&C 10 Tons Overhead Crane (1 unit). Take advantage of this outstanding offer and secure these units today, contact us now to make an offer.

IMPORTANT NOTE: The seller has not provided a specific price reference and is open to considering all reasonable offers. However, please note that the seller reserves the right to decline any offer at their discretion.

 

Auction Ended

Item condition: Used

Categories: , , Tag:

Description

Surplus Equipment: GS E&C 10 Tons Overhead Crane (1 unit)

Details:

  • Manufacturer: GS Engineering & Construction
  • Capacity: 10 tons / 21.9 meters overhead crane-hoisting
  • Year of Manufacture: 2017
  • Service: Crane for Warehouse

Motor Datasheets

Motor 1 – 1 Unit Available
A. GENERAL C. VENDOR’S DATA
1. DRIVEN EQUIPMENT: 10ton x Span 21.9 m 1. MANUFACTURER: NAMSUNG MACHINERY
2. AMBIENT TEMPERATURE: MAX. 45ºC / MIN. 2ºC 2. FRAME REFERENCE: 180L
3. RELATIVE HUMIDITY: MAX. 85% / MIN. – % 3. FRAME MATERIAL: FC 200
4. ALTITUDE (SEA LEVEL): LESS THAN 1000 METERS 4. FULL LOAD SPEED: 720 RPM
5. APPLICABLE STD.: IEC 60034, 60072 and 60079 5. LOAD: 50% 75% 100% S.F
6. PROJECT SPEC.: 7T04-EL-00-TS-008 EFFICIENCY [%]: 73 76 78.6 1.0
7. AREA CLASSIFICATION: NON-HAZARDOUS POWER FACTOR [%] 46 60 66.3 1.0
8. SYSTEM FAULT LEVEL: 80 kA / 1 sec. CURRENT [A] 16 18 21 1.0
9. SYSTEM EARTHING: SOLID 6. ACCELERATION TIME: 0.3 sec.
10. DESIGN LIFE: MINIMUM 20 YEARS 7. FULL-LOAD TORQUE: 10.146 kg m
B. MOTOR DESIGN DATA 8. LOCKED ROTOR TORQUE: 228%
1. MOTOR RATING: See Note 1 9. PULL-UP TORQUE: 290%
NAMEPLATE RATING: 7.5 kW | 8 POLES 10. BREAK-DOWN TORQUE: 290.2%
RATED VOLTAGE: 400 V, 3 PHASE, 50 HZ See Note 2 11. LOCKED ROTOR CURRENT: 110.5 A
SERVICE FACTOR: 1.0 SYNC. SPEED 720 RPM 12. LOCK. ROTOR PWR FACTOR: 26%
2. MOTOR TYPE: SQUIRREL CAGE INDUCTION 13. STALL TIME (HOT/COLD): 0.7 sec.
3. OPERATION DUTY: S4 INTERMITTENT 14. TRANSIENT REACTANCE (X’d): N/A
4. ENCLOSURE TYPE: IP55 15. SUB-TRANSIENT REACTANCE (X’d): N/A
5. COOLING METHOD: ( ) TENV | (X) TEFC | ( ) CACA | ( ) TEWAC 16. SPACE HEATER RATING: N/A V | N/A W
6. TYPE OF PROTECTION REQ’D: ( ) TYPE n (Exn) | ( ) TYPE p (Exp) 17. INSULATION CLASS/TEMP. RISE: F/75ºC
( ) TYPE e (Exe) | ( ) TYPE d (Exd) 18. STATOR CONNECTION: Star
7. STARTING METHOD: (X) DOL | ( ) AUTO-TRANS. 19. TEMP. DETECTOR (WIND./BEARING): N/A
8. PROTECTION DEVICES: ( ) FUSE | (X) C.B 20. VIBRATION DETECTOR: N/A
9. MOUNTING: (X) HORIZONTAL | ( ) VERTICAL 21. MOTOR WEIGHT (NET/SHIPPED): 280 kg
( ) FOOT 22. ROTOR/LOAD MOMENT OF INERTIA: 0.673 / 0.742 kg.m2
10. DRIVE SYSTEM: (X) DIRECT | ( ) GEAR UNIT 23. BEARING REF. (DE/NDE): #6309DD / #6208DD
( ) V-BELTS 24. BEARING TYPE: ANTI-FRICCIONAL (BALL)
11. INSULATION CLASS: (X) F 25. BEARING LUBRIFICATION: GREASE
12. TEMP. RISE WITHIN CLASS: ( ) E | (X) B 26. BEARING LUBRIFICATION INTERVAL: 30,000 HOURS
13. MAIN TERMINAL BOX LOCATION: (X) RIGHT | ( ) LEFT 27. NUMBER OF CONSECUTIVE STARTS: 2 HOT / 3 COLD
14. ROTATION: (X) CCW | (X) CW 28. REQUIRED AIR FOR PURGE:
15. SPACE HEATER SUPPLY: N/A @STARTING (PURGING) N/A Nm3/min @ N/A bar
16. MAIN CABLE ENTRY: (X) SIDE | ( ) BOTTOM @OPERATING N/A Nm3/min @ N/A bar
17. CABLE CONNECTION: M25 29. Void
18. CABLE TYPE & SIZE (MOTOR): M32 30. TIME CONSTANTS (HEATING/COOLING) N/A sec.
19. CABLE TYPE & SIZE (S.H): TFR-CV 6SQ D. ADDITIONAL INFORMATION FURNISHED BY VENDOR
20. SOUND PRESSURE LEVEL: 67 dB Mean. @ 1 meter ON NO LOAD [V] TORQUE/SLIP, CURRENT/SLIP, POWER FACTOR/SLIP CURVES
21. FRAME EARTH BOSS: INTERNAL & EXTERNAL [N/A] TIME – CURRENT and THERMAL LIMIT CURVES
22. COLOR FINISHING: RAL 6028 [N/A] MOTOR THERMAL CAPACITY DATA
23. TEMPERATURE DETECTION: N/A [V] INSTALLATION, OPERATION & MAINTENANCE INSTRUCTION
24. VIBRATION DETECTION: N/A [V] RECOMMENDED SPARE PARTS LIST
25. SURGE WITHSTAND EQUIPMENT.: N/A [V] DIMENSIONAL OUTLINE DRAWING
26. MAX. STARTING CURRENT: 526.2% [V] CERTIFIED TEST REPORT & WRITTEN STATEMENT
27. SPECIAL REQUIREMENTS: N/A [V] COMPLETE NAMEPLATE DATA
28. CORE BALANCE CR: N/A (See Note 6) [V] SEE INDUCTION MOTORS SPECIFICATION FOR DETAIL
E. OTHERS (BY VENDOR)
1. ACOUSTIC HOOD FITTED (X) NO | ( ) YES
2. CERTIFICATION AUTHORITY N/A
F. NOTES 2. CERT. STANDARD & NUMBER N/A
1. (*) VENDOR TO CONFIRM
2. RATED VOLTAGE: UP TO 150 kW: 400 V | OVER 150 kW ~ BELOW 3000 kW: 6.6 kV | 3000 kW AND ABOVE: 11 kV
3. SPACE HEATERS ARE REQUIRED FOR 30 kW AND ABOVE
4. 6 RTD (2 SETS PER PHASE – 3 WIRE TYPE 100 OHM) WINDING TEMPERATURE DETECTOR SHALL BE REQUIRED FOR MV MOTORS 1000 kW and LARGER
5. VENDOR SHALL COMPLY WITH THE ATTACHED MOTOR TERMINAL BOX HUB SIZE
6. MOTORS 3000 kW AND LARGER SHALL BE PROVIDED WITH CORE BALANCE CURRENT TRANSFORMER FOR DIFFERENTIAL PROTECTION
7. LRC LIMITING: UP TO 150 kW MOTOR: 600% WITH IEC TOLERANCE, ABOVE 150 kW ~ UP TO 2000 kW: 550% WITH IEC TOLERANCE, ABOVE 2000 kW: ONLY 450% WITHOUT IEC TOLERANCE
8. MOTOR SHALL BE EQUIPPED WITH A CANOPY UNLESS AN AIR DUCT, COOLER, OR SILENCER WHICH IS EFFECTIVE FOR A CANOPY IS PROVIDED ON THE TOP MOTOR

Motor 2 – 1 Unit Available
A. GENERAL C. VENDOR’S DATA
1. DRIVEN EQUIPMENT: 10ton x Span 21.9 m 1. MANUFACTURER: NAMSUNG MACHINERY
2. AMBIENT TEMPERATURE: MAX. 45ºC / MIN. 2ºC 2. FRAME REFERENCE: 90L
3. RELATIVE HUMIDITY: MAX. 85% / MIN. – % 3. FRAME MATERIAL: FC 200
4. ALTITUDE (SEA LEVEL): LESS THAN 1000 METERS 4. FULL LOAD SPEED: 717 RPM
5. APPLICABLE STD.: IEC 60034, 60072 and 60079 5. LOAD: 50% 75% 100% S.F
6. PROJECT SPEC.: 7T04-EL-00-TS-008 EFFICIENCY [%]: 49 52 54.6 1.0
7. AREA CLASSIFICATION: NON-HAZARDOUS POWER FACTOR [%] 35 46 53.2 1.0
8. SYSTEM FAULT LEVEL: 80 kA / 1 sec. CURRENT [A] 2.8 3.1 4.6 1.0
9. SYSTEM EARTHING: SOLID 6. ACCELERATION TIME: 0.3 sec.
10. DESIGN LIFE: MINIMUM 20 YEARS 7. FULL-LOAD TORQUE: 1.25 kg m
B. MOTOR DESIGN DATA 8. LOCKED ROTOR TORQUE: 232%
1. MOTOR RATING: See Note 1 9. PULL-UP TORQUE: 190%
NAMEPLATE RATING: 0.92 kW | 8 POLES 10. BREAK-DOWN TORQUE: 209%
RATED VOLTAGE: 400 V, 3 PHASE, 50 HZ See Note 2 11. LOCKED ROTOR CURRENT: 22 A
SERVICE FACTOR: 1.0 SYNC. SPEED 717 RPM 12. LOCK. ROTOR PWR FACTOR: 23%
2. MOTOR TYPE: SQUIRREL CAGE INDUCTION 13. STALL TIME (HOT/COLD): 0.7 sec.
3. OPERATION DUTY: S4 INTERMITTENT 14. TRANSIENT REACTANCE (X’d): N/A
4. ENCLOSURE TYPE: IP55 15. SUB-TRANSIENT REACTANCE (X’d): N/A
5. COOLING METHOD: (X) TENV | ( ) TEFC | ( ) CACA | ( ) TEWAC 16. SPACE HEATER RATING: N/A V | N/A W
6. TYPE OF PROTECTION REQ’D: ( ) TYPE n (Exn) | ( ) TYPE p (Exp) 17. INSULATION CLASS/TEMP. RISE: F/75ºC
( ) TYPE e (Exe) | ( ) TYPE d (Exd) 18. STATOR CONNECTION: Star
7. STARTING METHOD: (X) DOL | ( ) AUTO-TRANS. 19. TEMP. DETECTOR (WIND./BEARING): N/A
8. PROTECTION DEVICES: ( ) FUSE | (X) C.B 20. VIBRATION DETECTOR: N/A
9. MOUNTING: (X) HORIZONTAL | ( ) VERTICAL 21. MOTOR WEIGHT (NET/SHIPPED): 58 kg
( ) FOOT 22. ROTOR/LOAD MOMENT OF INERTIA: 0.088 / 0.104 kg.m2
10. DRIVE SYSTEM: (X) DIRECT | ( ) GEAR UNIT 23. BEARING REF. (DE/NDE): #6206DD / #6206DD
( ) V-BELTS 24. BEARING TYPE: ANTI-FRICCIONAL (BALL)
11. INSULATION CLASS: (X) F 25. BEARING LUBRIFICATION: GREASE
12. TEMP. RISE WITHIN CLASS: ( ) E | (X) B 26. BEARING LUBRIFICATION INTERVAL: 30,000 HOURS
13. MAIN TERMINAL BOX LOCATION: (X) RIGHT | ( ) LEFT 27. NUMBER OF CONSECUTIVE STARTS: 2 HOT / 3 COLD
14. ROTATION: (X) CCW | (X) CW 28. REQUIRED AIR FOR PURGE:
15. SPACE HEATER SUPPLY: N/A @STARTING (PURGING) N/A Nm3/min @ N/A bar
16. MAIN CABLE ENTRY: (X) SIDE | ( ) BOTTOM @OPERATING N/A Nm3/min @ N/A bar
17. CABLE CONNECTION: M25 29. Void
18. CABLE TYPE & SIZE (MOTOR): TFR-CV 2.5SQ 30. TIME CONSTANTS (HEATING/COOLING) N/A sec.
19. CABLE TYPE & SIZE (S.H): N/A D. ADDITIONAL INFORMATION FURNISHED BY VENDOR
20. SOUND PRESSURE LEVEL: 58 dB Mean. @ 1 meter ON NO LOAD [V] TORQUE/SLIP, CURRENT/SLIP, POWER FACTOR/SLIP CURVES
21. FRAME EARTH BOSS: INTERNAL & EXTERNAL [N/A] TIME – CURRENT and THERMAL LIMIT CURVES
22. COLOR FINISHING: RAL 6028 [N/A] MOTOR THERMAL CAPACITY DATA
23. TEMPERATURE DETECTION: N/A [V] INSTALLATION, OPERATION & MAINTENANCE INSTRUCTION
24. VIBRATION DETECTION: N/A [V] RECOMMENDED SPARE PARTS LIST
25. SURGE WITHSTAND EQUIPMENT.: N/A [V] DIMENSIONAL OUTLINE DRAWING
26. MAX. STARTING CURRENT: 478.3% [V] CERTIFIED TEST REPORT & WRITTEN STATEMENT
27. SPECIAL REQUIREMENTS: N/A [V] COMPLETE NAMEPLATE DATA
28. CORE BALANCE CR: N/A (See Note 6) [V] SEE INDUCTION MOTORS SPECIFICATION FOR DETAIL
E. OTHERS (BY VENDOR)
1. ACOUSTIC HOOD FITTED (X) NO | ( ) YES
2. CERTIFICATION AUTHORITY N/A
F. NOTES 2. CERT. STANDARD & NUMBER N/A
1. (*) VENDOR TO CONFIRM
2. RATED VOLTAGE: UP TO 150 kW: 400 V | OVER 150 kW ~ BELOW 3000 kW: 6.6 kV | 3000 kW AND ABOVE: 11 kV
3. SPACE HEATERS ARE REQUIRED FOR 30 kW AND ABOVE
4. 6 RTD (2 SETS PER PHASE – 3 WIRE TYPE 100 OHM) WINDING TEMPERATURE DETECTOR SHALL BE REQUIRED FOR MV MOTORS 1000 kW and LARGER
5. VENDOR SHALL COMPLY WITH THE ATTACHED MOTOR TERMINAL BOX HUB SIZE
6. MOTORS 3000 kW AND LARGER SHALL BE PROVIDED WITH CORE BALANCE CURRENT TRANSFORMER FOR DIFFERENTIAL PROTECTION
7. LRC LIMITING: UP TO 150 kW MOTOR: 600% WITH IEC TOLERANCE, ABOVE 150 kW ~ UP TO 2000 kW: 550% WITH IEC TOLERANCE, ABOVE 2000 kW: ONLY 450% WITHOUT IEC TOLERANCE
8. MOTOR SHALL BE EQUIPPED WITH A CANOPY UNLESS AN AIR DUCT, COOLER, OR SILENCER WHICH IS EFFECTIVE FOR A CANOPY IS PROVIDED ON THE TOP MOTOR

Motor 3 – 1 Unit Available
A. GENERAL C. VENDOR’S DATA
1. DRIVEN EQUIPMENT: 10ton x Span 21.9 m 1. MANUFACTURER: NAMSUNG MACHINERY
2. AMBIENT TEMPERATURE: MAX. 45ºC / MIN. 2ºC 2. FRAME REFERENCE: 80
3. RELATIVE HUMIDITY: MAX. 85% / MIN. – % 3. FRAME MATERIAL: ALDC 12
4. ALTITUDE (SEA LEVEL): LESS THAN 1000 METERS 4. FULL LOAD SPEED: 938 RPM
5. APPLICABLE STD.: IEC 60034, 60072 and 60079 5. LOAD: 50% 75% 100% S.F
6. PROJECT SPEC.: 7T04-EL-00-TS-008 EFFICIENCY [%]: 65 69 71 1.0
7. AREA CLASSIFICATION: NON-HAZARDOUS POWER FACTOR [%] 39 50 57.3 1.0
8. SYSTEM FAULT LEVEL: 80 kA / 1 sec. CURRENT [A] 1.4 1.5 1.75 1.0
9. SYSTEM EARTHING: SOLID 6. ACCELERATION TIME: 0.3 sec.
10. DESIGN LIFE: MINIMUM 20 YEARS 7. FULL-LOAD TORQUE: 0.436 kg m
B. MOTOR DESIGN DATA 8. LOCKED ROTOR TORQUE: 293.4%
1. MOTOR RATING: See Note 1 9. PULL-UP TORQUE: 290%
NAMEPLATE RATING: 0.42 kW | 6 POLES 10. BREAK-DOWN TORQUE: 290.2%
RATED VOLTAGE: 400 V, 3 PHASE, 50 HZ See Note 2 11. LOCKED ROTOR CURRENT: 8.2 A
SERVICE FACTOR: 1.0 SYNC. SPEED 938 RPM 12. LOCK. ROTOR PWR FACTOR: 27%
2. MOTOR TYPE: SQUIRREL CAGE INDUCTION 13. STALL TIME (HOT/COLD): 0.6 sec.
3. OPERATION DUTY: S4 INTERMITTENT 14. TRANSIENT REACTANCE (X’d): N/A
4. ENCLOSURE TYPE: IP55 15. SUB-TRANSIENT REACTANCE (X’d): N/A
5. COOLING METHOD: ( ) TENV | (X) TEFC | ( ) CACA | ( ) TEWAC 16. SPACE HEATER RATING: N/A V | N/A W
6. TYPE OF PROTECTION REQ’D: ( ) TYPE n (Exn) | ( ) TYPE p (Exp) 17. INSULATION CLASS/TEMP. RISE: F/75ºC
( ) TYPE e (Exe) | ( ) TYPE d (Exd) 18. STATOR CONNECTION: Star
7. STARTING METHOD: (X) DOL | ( ) AUTO-TRANS. 19. TEMP. DETECTOR (WIND./BEARING): N/A
8. PROTECTION DEVICES: ( ) FUSE | (X) C.B 20. VIBRATION DETECTOR: N/A
9. MOUNTING: (X) HORIZONTAL | ( ) VERTICAL 21. MOTOR WEIGHT (NET/SHIPPED): 30 kg
( ) FOOT 22. ROTOR/LOAD MOMENT OF INERTIA: 0.009 / 0.01 kg.m2
10. DRIVE SYSTEM: (X) DIRECT | ( ) GEAR UNIT 23. BEARING REF. (DE/NDE): #6005ZZ / #6203DD
( ) V-BELTS 24. BEARING TYPE: ANTI-FRICCIONAL (BALL)
11. INSULATION CLASS: (X) F 25. BEARING LUBRIFICATION: GREASE
12. TEMP. RISE WITHIN CLASS: ( ) E | (X) B 26. BEARING LUBRIFICATION INTERVAL: 30,000 HOURS
13. MAIN TERMINAL BOX LOCATION: (X) RIGHT | ( ) LEFT 27. NUMBER OF CONSECUTIVE STARTS: 2 HOT / 3 COLD
14. ROTATION: (X) CCW | (X) CW 28. REQUIRED AIR FOR PURGE:
15. SPACE HEATER SUPPLY: N/A @STARTING (PURGING) N/A Nm3/min @ N/A bar
16. MAIN CABLE ENTRY: (X) SIDE | ( ) BOTTOM @OPERATING N/A Nm3/min @ N/A bar
17. CABLE CONNECTION: M25 29. Void
18. CABLE TYPE & SIZE (MOTOR): M25 30. TIME CONSTANTS (HEATING/COOLING) N/A sec.
19. CABLE TYPE & SIZE (S.H): N/A D. ADDITIONAL INFORMATION FURNISHED BY VENDOR
20. SOUND PRESSURE LEVEL: 62 dB Mean. @ 1 meter ON NO LOAD [V] TORQUE/SLIP, CURRENT/SLIP, POWER FACTOR/SLIP CURVES
21. FRAME EARTH BOSS: INTERNAL & EXTERNAL [N/A] TIME – CURRENT and THERMAL LIMIT CURVES
22. COLOR FINISHING: RAL 6028 [N/A] MOTOR THERMAL CAPACITY DATA
23. TEMPERATURE DETECTION: N/A [V] INSTALLATION, OPERATION & MAINTENANCE INSTRUCTION
24. VIBRATION DETECTION: N/A [V] RECOMMENDED SPARE PARTS LIST
25. SURGE WITHSTAND EQUIPMENT.: N/A [V] DIMENSIONAL OUTLINE DRAWING
26. MAX. STARTING CURRENT: 468.6% [V] CERTIFIED TEST REPORT & WRITTEN STATEMENT
27. SPECIAL REQUIREMENTS: N/A [V] COMPLETE NAMEPLATE DATA
28. CORE BALANCE CR: N/A (See Note 6) [V] SEE INDUCTION MOTORS SPECIFICATION FOR DETAIL
E. OTHERS (BY VENDOR)
1. ACOUSTIC HOOD FITTED (X) NO | ( ) YES
2. CERTIFICATION AUTHORITY N/A
F. NOTES 2. CERT. STANDARD & NUMBER N/A
1. (*) VENDOR TO CONFIRM
2. RATED VOLTAGE: UP TO 150 kW: 400 V | OVER 150 kW ~ BELOW 3000 kW: 6.6 kV | 3000 kW AND ABOVE: 11 kV
3. SPACE HEATERS ARE REQUIRED FOR 30 kW AND ABOVE
4. 6 RTD (2 SETS PER PHASE – 3 WIRE TYPE 100 OHM) WINDING TEMPERATURE DETECTOR SHALL BE REQUIRED FOR MV MOTORS 1000 kW and LARGER
5. VENDOR SHALL COMPLY WITH THE ATTACHED MOTOR TERMINAL BOX HUB SIZE
6. MOTORS 3000 kW AND LARGER SHALL BE PROVIDED WITH CORE BALANCE CURRENT TRANSFORMER FOR DIFFERENTIAL PROTECTION
7. LRC LIMITING: UP TO 150 kW MOTOR: 600% WITH IEC TOLERANCE, ABOVE 150 kW ~ UP TO 2000 kW: 550% WITH IEC TOLERANCE, ABOVE 2000 kW: ONLY 450% WITHOUT IEC TOLERANCE
8. MOTOR SHALL BE EQUIPPED WITH A CANOPY UNLESS AN AIR DUCT, COOLER, OR SILENCER WHICH IS EFFECTIVE FOR A CANOPY IS PROVIDED ON THE TOP MOTOR

Motor 4 – 2 units available
A. GENERAL C. VENDOR’S DATA
1. DRIVEN EQUIPMENT: 10ton x Span 21.9 m 1. MANUFACTURER: NAMSUNG MACHINERY
2. AMBIENT TEMPERATURE: MAX. 45ºC / MIN. 2ºC 2. FRAME REFERENCE: 112M
3. RELATIVE HUMIDITY: MAX. 85% / MIN. – % 3. FRAME MATERIAL: ALDC 200
4. ALTITUDE (SEA LEVEL): LESS THAN 1000 METERS 4. FULL LOAD SPEED: 950 RPM
5. APPLICABLE STD.: IEC 60034, 60072 and 60079 5. LOAD: 50% 75% 100% S.F
6. PROJECT SPEC.: 7T04-EL-00-TS-008 EFFICIENCY [%]: 73 76 78 1.0
7. AREA CLASSIFICATION: NON-HAZARDOUS POWER FACTOR [%] 55 67 73 1.0
8. SYSTEM FAULT LEVEL: 80 kA / 1 sec. CURRENT [A] 3.5 3.8 4.5 1.0
9. SYSTEM EARTHING: SOLID 6. ACCELERATION TIME: 0.3 sec.
10. DESIGN LIFE: MINIMUM 20 YEARS 7. FULL-LOAD TORQUE: 1.333 kg m
B. MOTOR DESIGN DATA 8. LOCKED ROTOR TORQUE: 225%
1. MOTOR RATING: See Note 1 9. PULL-UP TORQUE: 185%
NAMEPLATE RATING: 1.3 kW | 6 POLES 10. BREAK-DOWN TORQUE: 306%
RATED VOLTAGE: 400 V, 3 PHASE, 50 HZ See Note 2 11. LOCKED ROTOR CURRENT: 16 A
SERVICE FACTOR: 1.0 SYNC. SPEED 950 RPM 12. LOCK. ROTOR PWR FACTOR: 22%
2. MOTOR TYPE: SQUIRREL CAGE INDUCTION 13. STALL TIME (HOT/COLD): 0.6 sec.
3. OPERATION DUTY: S4 INTERMITTENT 14. TRANSIENT REACTANCE (X’d): N/A
4. ENCLOSURE TYPE: IP55 15. SUB-TRANSIENT REACTANCE (X’d): N/A
5. COOLING METHOD: ( ) TENV | (X) TEFC | ( ) CACA | ( ) TEWAC 16. SPACE HEATER RATING: N/A V | N/A W
6. TYPE OF PROTECTION REQ’D: ( ) TYPE n (Exn) | ( ) TYPE p (Exp) 17. INSULATION CLASS/TEMP. RISE: F/75ºC
( ) TYPE e (Exe) | ( ) TYPE d (Exd) 18. STATOR CONNECTION: Star
7. STARTING METHOD: (X) DOL | ( ) AUTO-TRANS. 19. TEMP. DETECTOR (WIND./BEARING): N/A
8. PROTECTION DEVICES: ( ) FUSE | (X) C.B 20. VIBRATION DETECTOR: N/A
9. MOUNTING: (X) HORIZONTAL | ( ) VERTICAL 21. MOTOR WEIGHT (NET/SHIPPED): 64.6 kg
( ) FOOT 22. ROTOR/LOAD MOMENT OF INERTIA: 0.064 / 0.078 kg.m2
10. DRIVE SYSTEM: (X) DIRECT | ( ) GEAR UNIT 23. BEARING REF. (DE/NDE): #6208DD / #6006DD
( ) V-BELTS 24. BEARING TYPE: ANTI-FRICCIONAL (BALL)
11. INSULATION CLASS: (X) F 25. BEARING LUBRIFICATION: GREASE
12. TEMP. RISE WITHIN CLASS: ( ) E | (X) B 26. BEARING LUBRIFICATION INTERVAL: N/A
13. MAIN TERMINAL BOX LOCATION: (X) RIGHT | ( ) LEFT 27. NUMBER OF CONSECUTIVE STARTS: 2 HOT / 3 COLD
14. ROTATION: (X) CCW | (X) CW 28. REQUIRED AIR FOR PURGE:
15. SPACE HEATER SUPPLY: N/A @STARTING (PURGING) N/A Nm3/min @ N/A bar
16. MAIN CABLE ENTRY: (X) SIDE | ( ) BOTTOM @OPERATING N/A Nm3/min @ N/A bar
17. CABLE CONNECTION: M32 29. Void
18. CABLE TYPE & SIZE (MOTOR): TFR-CV 4.0SQ 30. TIME CONSTANTS (HEATING/COOLING) N/A sec.
19. CABLE TYPE & SIZE (S.H): N/A D. ADDITIONAL INFORMATION FURNISHED BY VENDOR
20. SOUND PRESSURE LEVEL: 62 dB Mean. @ 1 meter ON NO LOAD [V] TORQUE/SLIP, CURRENT/SLIP, POWER FACTOR/SLIP CURVES
21. FRAME EARTH BOSS: INTERNAL & EXTERNAL [N/A] TIME – CURRENT and THERMAL LIMIT CURVES
22. COLOR FINISHING: RAL 6028 [N/A] MOTOR THERMAL CAPACITY DATA
23. TEMPERATURE DETECTION: N/A [V] INSTALLATION, OPERATION & MAINTENANCE INSTRUCTION
24. VIBRATION DETECTION: N/A [V] RECOMMENDED SPARE PARTS LIST
25. SURGE WITHSTAND EQUIPMENT.: N/A [V] DIMENSIONAL OUTLINE DRAWING
26. MAX. STARTING CURRENT: 312.5% [V] CERTIFIED TEST REPORT & WRITTEN STATEMENT
27. SPECIAL REQUIREMENTS: N/A [V] COMPLETE NAMEPLATE DATA
28. CORE BALANCE CR: N/A (See Note 6) [V] SEE INDUCTION MOTORS SPECIFICATION FOR DETAIL
E. OTHERS (BY VENDOR)
1. ACOUSTIC HOOD FITTED (X) NO | ( ) YES
2. CERTIFICATION AUTHORITY N/A
F. NOTES 2. CERT. STANDARD & NUMBER N/A
1. (*) VENDOR TO CONFIRM
2. RATED VOLTAGE: UP TO 150 kW: 400 V | OVER 150 kW ~ BELOW 3000 kW: 6.6 kV | 3000 kW AND ABOVE: 11 kV
3. SPACE HEATERS ARE REQUIRED FOR 30 kW AND ABOVE
4. 6 RTD (2 SETS PER PHASE – 3 WIRE TYPE 100 OHM) WINDING TEMPERATURE DETECTOR SHALL BE REQUIRED FOR MV MOTORS 1000 kW and LARGER
5. VENDOR SHALL COMPLY WITH THE ATTACHED MOTOR TERMINAL BOX HUB SIZE
6. MOTORS 3000 kW AND LARGER SHALL BE PROVIDED WITH CORE BALANCE CURRENT TRANSFORMER FOR DIFFERENTIAL PROTECTION
7. LRC LIMITING: UP TO 150 kW MOTOR: 600% WITH IEC TOLERANCE, ABOVE 150 kW ~ UP TO 2000 kW: 550% WITH IEC TOLERANCE, ABOVE 2000 kW: ONLY 450% WITHOUT IEC TOLERANCE
8. MOTOR SHALL BE EQUIPPED WITH A CANOPY UNLESS AN AIR DUCT, COOLER, OR SILENCER WHICH IS EFFECTIVE FOR A CANOPY IS PROVIDED ON THE TOP MOTOR

Material Condition:

  • Condition: Used

Geography, Logistics & Export Information:

  • Region: Egypt
  • Dismantling: The location will be responsible for the dismantling scope.
  • Loading Capabilities: The location has no loading capabilities.
  • Export: Material can be exported. There might be associated customs duties/ local taxes. Information to be checked and informed when an acceptable offer is made – depends on the buyer’s location.
  • Local Sales: Local taxes might be applicable if the material is sold in the country.

IMPORTANT NOTE: The seller has not provided a specific price reference and is open to considering all reasonable offers. However, please note that the seller reserves the right to decline any bid at their discretion.

Buyer’s Premium: 10% service fee to be added to the final invoice or invoiced separately by Surpplax Asset Management.

General Conditions of Sale Agreement: The material is being sold “as is, where is. The Buyer must sign the agreement before the material’s release. As soon as payment is confirmed, the Seller will promptly issue a Release to authorize the Buyer to pick up the item and the title will officially transfer from the Seller to the Buyer.

We take great care to provide accurate and detailed information about the assets available for sale. However, we strongly recommend that the Buyer double-check the quantities and conditions listed before collecting material. The amount listed will be subject to plus/minus (+/- 05%) tolerance and no adjustment will be made if within this range. If any discrepancies are noted over +/- 5% of the listed quantities, the Buyer must notify Surpplax before collecting material.

Auction History

Auction has finished

Auction failed because there were no bids
February 15, 2024 12:00 amAuction started
  • EMD Engine Coupling Assembly

    EMD Engine Coupling Assembly (3 units)

    Revitalize your locomotive power with this EMD Engine Coupling Assembly – guaranteed precision and durability. Upgrade your engine performance seamlessly. Invest in quality, and propel your operations forward. Take advantage of this outstanding offer and secure this unit today, contact us now to make an offer.

    IMPORTANT NOTE: The seller has not provided a specific price reference and is open to considering all reasonable offers. However, please note that the seller reserves the right to decline any bid at their discretion.

    Quick View
  • 60 HP Triplex Oil Transfer Electric Pump Package

    60 HP Triplex Oil Transfer Electric Pump Package 56.4 gpm (1 Unit)

    The seller is looking to sell this unit of 60 HP Triplex Oil Transfer Electric Pump Package 56.4 gpm (1 Unit) to recover investment and create additional storage space for coming-up operations. Take advantage of this outstanding offer and secure this lot today, contact us now to make an offer.

    IMPORTANT NOTE: The seller has not provided a specific price reference and is open to considering all reasonable offers. However, please note that the seller reserves the right to decline any offer at their discretion. 

    Auction Ended
    Quick View
  • MacGregor Davit HMD G100

    MACGREGOR Davit HMD G100 with Work Boat MP 1111 FRDC (1 set)

    Introducing the MACGREGOR Davit HMD G100 with Work Boat MP 1111 (1 set): Your complete solution for efficient marine operations. This unit, being offered by the seller to recover capital, combines the reliability of the HMD G100 Davit with the versatility of the MP 1111 Work Boat. Don’t miss this opportunity to streamline your vessel’s capabilities with this exceptional package. Take advantage of this outstanding offer and secure these units today, contact us now to make an offer.

    IMPORTANT NOTE: The seller is open to considering all reasonable offers. However, please note that the seller reserves the right to decline any offer at their discretion. Crane manual available upon request.

     

    Starting Bid: $ 570.000,00
    Quick View
  • MAN 1584 Gross Tonnage Propelled Crane

    MAN 1584 Gross Tonnage Propelled Crane (1 unit)

    Unlock Exceptional Value with this MAN 1584 Gross Tonnage Propelled Crane. Are you in search of a reliable and powerful crane for your industrial needs? Look no further! We are offering a MAN 1584 Gross Tonnage Propelled Crane, built in 1983, available for immediate sale. This robust machine is being sold by its owner to recover funds and is equipped with up-to-date class certificates, ensuring its operational integrity and compliance with industry standards.

    Do you want to get more information about this asset? Please send us your email and phone number and we will contact you soon!

     

    Quick View

Related products

  • Heila Crane HR120/15 BJ

    Heila Crane HR120/15 BJ (1 unit)

    Upgrade your marine operations with the Heila Crane HR120/15 BJ. This high-performance crane, available now to help you recover capital, ensures reliable lifting on your vessel. Don’t miss out—enhance your capabilities today! Take advantage of this outstanding offer and secure these units today, contact us now to make an offer.

    IMPORTANT NOTE: The seller is open to considering all reasonable offers. However, please note that the seller reserves the right to decline any offer at their discretion. 

     

    Starting Bid: $ 285.000,00
    Quick View
  • DEN-CON FCS-1400 Flush Casing Spyder

    DEN-CON FCS-1400 Flush Casing Spyder (1 system)

    The DEN-CON FCS-1400 Flush Casing Spyder (1 system) is a family of tools specifically designed for casing handling operations. All FCS tools mount inside the rotary and eliminate the need for special rig floor platforms when running casing. Take advantage of this outstanding offer and secure these units today, contact us now to make an offer.

    IMPORTANT NOTE: The seller is open to considering all reasonable offers. However, please note that the seller reserves the right to decline any offer at their discretion.

     

    Starting Bid: $ 86.630,00
    Quick View
  • MAN 1584 Gross Tonnage Propelled Crane

    MAN 1584 Gross Tonnage Propelled Crane (1 unit)

    Unlock Exceptional Value with this MAN 1584 Gross Tonnage Propelled Crane. Are you in search of a reliable and powerful crane for your industrial needs? Look no further! We are offering a MAN 1584 Gross Tonnage Propelled Crane, built in 1983, available for immediate sale. This robust machine is being sold by its owner to recover funds and is equipped with up-to-date class certificates, ensuring its operational integrity and compliance with industry standards.

    Do you want to get more information about this asset? Please send us your email and phone number and we will contact you soon!

     

    Quick View
  • DEN-CON 350 Ton Casing Elevator

    DEN-CON 350 Ton Casing Elevator (1 system)

    Unleash unparalleled efficiency with the DEN-CON 350 Ton Casing Elevator (1 system). This elevator excels in handling heavy casing loads, engineered for precision and durability. Elevate your oilfield operations with cutting-edge technology and reliability. Take advantage of this outstanding offer and secure these units today, contact us now to make an offer.

    IMPORTANT NOTE: The seller is open to considering all reasonable offers. However, please note that the seller reserves the right to decline any offer at their discretion.

     

    Starting Bid: $ 58.600,00
    Quick View
Browse through our products library!
Search
Cart
Wishlist

Copyright by Surpplax Asset Management. All Rights Reserved.

Reduce, reuse and recycle

X